Category Archives: Phần mềm PLC Software

CX-Protocol Software

CX-Protocol Software

Tài liệu tiếng anh CX-Protocol Software

Reduce the Work Required to Create Data Communications Protocols for General-purpose Devices

Application software to create protocols (communications sequences) between SYSMAC CS/CJ/CP/NSJ-series or C200HX/HG/HE Serial Communications Boards/Units and general-purpose external devices.

Create protocols for general-purpose devices connected to PLC Boards or Units via RS-232C or RS-485A/422.

Transfer the protocols to PLC Boards and Units.

Repeat steps or branch/end steps according to response contents

 

CX-Simulator Software

CX-Simulator Software

Tài liệu tiếng anh CX-Simulator Software

Increase Development and Debugging Efficiency with Various Debugging Tools, Including Functions That Are Not Possible on the Actual PLC

Application software to simulate SYSMAC CS/CJ/CP/NSJ Series CPU Unit operation on the computer to debug PLC programs without a CPU Unit.

Apply virtual external inputs to a virtual CPU Unit to debug programming.

Execute programs by steps or with break point settings, or use any of the many other debugging functions.

Check the cycle time during simulation.

Debug network communications and serial communications as well.

 

CX-Programmer Software

CX-Programmer Software

 

Tài liệu tiếng anh CX-Programmer Software

Improve Productivity for SYSMAC PLCs from Ladder Program Development and Unit Setup to Debugging and Maintenance

Application software to create and debug programs for SYSMAC CS/CJ/CP/NSJ-series, C-series, and CVM1/C-series CPU Units.

Easily achieve position control with wading through user manuals.

Complete support for synchronous operation between units.

Easier connection to PLCs.

Batch backup/restore with a computer.

Comprehensive programming environment.

High program readability.

Time required for onsite startup and debugging has been significantly reduced.

 

CX-Process Monitor Plus Software

CX-Process Monitor Plus Software

Tài liệu tiếng anh CX-Process Monitor Plus Software

Monitors and controls operation of function blocks in loop control units

The CX-Process Monitor Plus is HMI (human-machine interface) software that can easily configure standard screens from the tag information created with the CX-Process Tool.